Montana Shop & Yard Estate Auction

Vintage brown leather bomber-style motorcycle jacket, no visible maker's mark or label. Classic bomber silhouette with point collar, front zip closure with brass-tone hardware, two lower zip pockets, one chest snap pocket, elasticized hem with additional zip detail at rear hem, and snap cuffs. Lining is dark fabric, showing age. Construction and styling consistent with 1980s–1990s vintage production.

Condition: Overall good condition consistent with age and use. Leather shows surface wear, fading at stress points, and age patina throughout — typical for a well-used vintage jacket. Lining shows wear. Front zipper reported as difficult to operate — inspect in person. No visible tears or structural damage noted in photos. Refer to photos and in-person inspection for condition.

Approximate Dimensions: Size XL (seller-estimated — no visible label)

Harley-Davidson genuine leather motorcycle jacket, size XL. Black genuine leather body with 100% polyester lining, per interior label (RN 103819 / CA 03402). Features embossed flame detailing across the front, back, and sleeves with contrast stitching in a dark red/orange tone. Harley-Davidson Bar & Shield logo embossed on upper back with "HARLEY-DAVIDSON" lettering in raised leather. Interior label features the embroidered eagle "An American Legend" graphic. Hardware includes front zip closure, two lower zip pockets, one chest snap pocket, zippered cuffs, and dual buckle belt adjusters at the hem.

Condition: Good to excellent condition per seller — not independently verified by auction. Leather shows light wear consistent with use. No visible tears, cracking, or significant damage noted in photos. All zippers and hardware appear intact. Refer to photos and in-person inspection for condition.

Approximate Dimensions: Size XL

Harley-Davidson Genuine MotorClothes leather motorcycle jacket, size 2XL. Body constructed of genuine buffalohide leather with 100% polyester lining, per interior label. Features front zip closure, two lower angled zip pockets, perforated leather ventilation panels on chest and back, zippered cuffs, and dual buckle adjusters at hem. Embroidered Harley-Davidson Bar & Shield patch on left chest, additional HD graphics patch on right chest, and large embroidered eagle Bar & Shield graphic on rear. Interior label reads "Genuine MotorClothes — An American Legend."

Condition: Excellent condition Leather shows light wear and minor surface scuffs consistent with use. All hardware and zippers appear intact in photos. Perforated panels and embroidery in good order. Refer to photos and in-person inspection for condition.

Approximate Dimensions: Size 2XL

Harley-Davidson Genuine MotorClothes "Riding Gear" textile motorcycle jacket, size 2XL. Shell and lining are 100% polyester with genuine cowhide leather trim, per interior label. Black with tonal "HARLEY-DAVIDSON" lettering across the chest, reflective accent piping on shoulders and sleeves, snap collar closure, front zip, two lower zip pockets, one right-chest zip pocket, and zippered cuffs. Mesh lining interior for ventilation. Designed for all-season riding use.

Condition: Excellent condition. No visible damage, soiling, or wear noted in photos or inspection. All zippers and hardware appear fully functional. Refer to photos and in-person inspection for condition.

Approximate Dimensions: Size 2XL

Harley-Davidson 100% cotton shirt-style jacket, size XL Tall, per interior label (RN 103819 / CA 03402). Black cotton construction with point collar, snap-button front closure, two chest snap pockets, and long tail hem. Interior label features the embroidered eagle "An American Legend" graphic. A decorative silver-tone chain is attached at the collar. Vintage production, made in Hong Kong.

Condition: Good condition with light use. Surface shows minor dust and light soiling consistent with storage and wear — no significant damage, tears, or staining noted in photos. Refer to photos and in-person inspection for condition.

Approximate Dimensions: Size XL Tall

Ariens automatic riding lawn tractor in orange. Features automatic transmission and mower deck. Blade engagement lever present on dash. Exact model and deck size not confirmed from photos — flag for data plate verification. Seller represents unit as running and in working condition — not independently tested or verified by the auction house.

Condition shows general outdoor storage wear with surface soiling. No obvious damage observed from photos. Tires appear serviceable.

Cabela's Ice Team 6×8 Hub Shelter, Model No. 8433. Pop-up hub-style ice fishing shelter in dark gray/black fabric. Specifications per documentation: 72 inches height, 72 × 96 inch footprint, 90 × 115 inch hub-to-hub, 32 lbs. Features multiple windows with roll-up covers and zippered door entry. Includes carry bag.

Condition: Like new condition — verified. No visible tears, soiling, or damage noted. All hub poles present and functional. Carry bag included. Refer to photos and in-person inspection for condition.

Approximate Dimensions: 72 × 96 inch footprint; 72 inches height; 90 × 115 inch hub-to-hub

John Deere 240 lawn tractor with 46-inch mower deck and front-mounted snow blade. PIN M00240B498455. Manufactured by Deere & Company, Moline, Illinois. Unit is non-running — does not start or run in current condition. Mower deck and snow blade included. Engine, electrical, and mechanical condition unknown. Sold as-is for parts or repair.

Condition shows general outdoor storage wear with surface rust and paint wear consistent with age and use. Tires present. Seat shows wear.

Comfort Zone Industrial fan-forced ceiling mount heater, Model CZ220. 5,000 watts / 17,065 BTU output. Hard-wired 240-volt AC installation. Heavy gauge steel body with adjustable thermostat and overheat protection sensor with caution indicator light. Designed for garage, shop, or industrial space heating applications.

Condition: Appears unused in original box. Box shows shelf wear and minor scuffing. Contents appear complete and undisturbed. Refer to photos and in-person inspection for condition.

Framed lithograph reproduction from the Library of Thomas Kinkade, "Painter of Light." The image depicts a winding garden path flanked by flowering trees and ornamental iron gate — a characteristic Kinkade pastoral landscape composition. The print bears a painted signature reading "Thomas Kinkade" in red on the image surface, accompanied by a scriptural reference ("John 3:16") and what appears to be an edition or remarque notation. Presented in a gold-tone wood frame with cream mat and gold fillet. A small brass title plaque is affixed to the lower frame. Accompanied by an original Thomas Kinkade Certificate of Authenticity, signed, confirming this as a lithograph reproduction printed on 100% acid-free material. Thomas Kinkade (1958–2012) was one of the most widely collected American artists of the late 20th century, known for luminous light-filled landscapes and cottage scenes.

Condition: Frame shows minor wear consistent with age and handling. Print appears clean with no visible foxing, tears, or fading noted in photos. COA present and legible. Refer to photos and in-person inspection for condition.

Approximate Dimensions: 41 × 35 inches overall (framed)

Framed lithograph reproduction of "A Light in the Storm" by Thomas Kinkade, "Painter of Light," from the Library of Thomas Kinkade. The image depicts a coastal lighthouse scene with a keeper's cottage set against a dramatic stormy sky, waves breaking on rocky shores — one of Kinkade's well-recognized maritime compositions. Presented in a silver-tone wood frame with cream mat and gold fillet. Brass title plaque affixed to lower frame reads: A Light in the Storm by Thomas Kinkade. Accompanied by an original Thomas Kinkade Certificate of Authenticity, signed, confirming lithograph reproduction printed on 100% acid-free material.

Condition: Frame shows water damage — extent visible in photos. Mat and print should be inspected in person for any moisture migration behind the glass. No visible damage to the print image noted in photos, but water-affected frames can conceal mat or print damage not apparent at a distance. COA present and legible. Refer to photos and in-person inspection for condition.

Approximate Dimensions: 39 × 35 inches overall (framed)

Oil on canvas depicting a Native American warrior on horseback at full gallop across an open prairie landscape under a dramatic cloud-filled sky. The figure is shown with a spear and bow, wearing traditional regalia with a red sash, rendered in a representational Western art style with bold, expressive brushwork. The work is signed in the lower right "Loren Dollan" — the artist has not been identified in available records and should be considered unknown at this time. Presented in a wide decorative wood frame with carved geometric detail and linen liner.

Condition: Canvas and paint surface appear intact with no visible cracks, tears, or losses noted in photos. Frame shows age-appropriate wear. Refer to photos and in-person inspection for condition.

Approximate Dimensions: 28 × 24 inches

SSR Motorsports pit bike with a 70cc single-cylinder air-cooled engine, confirmed by casting mark on the engine case. SSR brand name visible on the engine cover. Orange front fender and yellow fuel tank, black tubular steel frame, knobby rear tire, chain drive, and kick-start configuration consistent with SSR's entry-level pit bike lineup. Handlebars, front forks, and rear suspension components present. Rear seat absent or not visible from photos.

Hisense 75-inch flat panel television, model 75A65K, serial number 75N23142AH09067, manufactured May 2023. 120V/230W, HDMI equipped, DTS:X audio. Includes a flat panel TV wall mount in original box. No remote included.

Condition: Per seller, TV is in working condition — not independently verified by auction. Screen surface appears clean with no visible cracks or damage noted in photos. Remote not included. Refer to photos and in-person inspection for condition.

Approximate Dimensions: 75-inch diagonal display

Hot tub cover manufactured by American Hydrotherapy Systems (AHS), model 304347C-03. Measures 81 × 81 inches with a cut corner configuration. Color is Chestnut. Manufactured June 22, 2020, made in Mexico. Cover remains in original factory plastic wrap and appears uninstalled. Plastic wrap is intact with no visible tears or punctures observed from exterior.

Single-axle utility trailer built from a vintage Chevrolet pickup truck bed, identifiable by the blue painted steel body with period "CHEVROLET" tailgate lettering and original tail light housings intact. Mounted on a steel frame with a single axle. Interior bed floor shows wood planking. Data plate on hitch reads SAE Class IV, 2-5/16" diameter ball, 10,000 LBS Gross Weight, 1,500 LBS Tongue Weight. Tires mounted on steel wheels in used condition.

Interior bed: approximately 66 × 98 inches.

Bill of Sale Only

Kenmore Coldspot top-freezer refrigerator, Model 106.78907891, Serial EH4517337. Manufactured November 1998 by Sears, Roebuck and Co. Operates on 60 Hz / 1 Phase / 115V, full load amperage 6.5A, refrigerant R134a. White exterior finish. Interior includes adjustable glass shelving, crisper drawers with humidity control, and door bin storage. Unit has been tested and confirmed operational.

Condition: Interior requires thorough cleaning — shelving, crisper drawers, and cabinet walls show accumulated grime and debris. Exterior presents with wear consistent with age and use. All shelving components appear present.

Approximate Dimensions: 66H × 30W × 30.5D inches

Refer to photos and in-person inspection for condition.

Millipore Corporation bacteriological water testing kit, NSN 6665-00-682-4765. Self-contained field testing unit housed in a heavy-duty blue carry case with latching lid. Interior control panel includes power switch, 5-amp fuse, voltage dial, and temperature control knobs. Unit includes power cord, test probe, wire rack tray, and a small parts container with accessories. Instruction reference card mounted to interior lid. U.S. military-spec NSN designation suggests government or institutional provenance.

Condition: Case exterior shows heavy wear, surface corrosion, and field use consistent with age. Interior components appear present and intact. Operational status not verified — sold as-is. Consumable test supplies, if any, are not guaranteed.

Approximate Dimensions: 14 × 10 × 9 inches

Refer to photos and in-person inspection for condition.

Lot of five LED shop lights. Packaging indicates 50,000-hour rated lifespan, instant full brightness, no warm-up time, pull chain switch, and easy plug-in installation. Units appear to be consumer-grade linkable LED shop lights based on visible packaging graphics.

Condition: Units appear to be in original packaging. New or used status has not been verified — sold as-is. Functionality has not been tested. Buyer should inspect packaging and contents at time of pickup.

Approximate Dimensions: TBA

Refer to photos and in-person inspection for condition.

Mixed lot of telecommunications and electrical testing tools. Lot includes three red telephone butt set test sets with handset cords and alligator clip leads — style consistent with industry-standard lineman test sets. Also included is one Harris TS30 all-weather test set in original box, featuring weather proof construction, DataSafe monitor mode, RainSafe water protection, DropSafe durability, and over voltage/current protection. Additional contents include a Cen-Tech 3-piece circuit tester set (Item 94120) in original packaging — includes continuity tester, 12V/24V volt tester, and high/low volt tester. Flat box contains assorted test leads, alligator clips, wire, and small hand tools. Black nylon pouch also included.

Condition: Three butt set units show heavy field use — wear to housings, keypads, and cords consistent with working service life. Harris TS30 appears to be in original box, condition of unit inside not fully verified. Cen-Tech circuit tester set appears to be in original unopened packaging. Assorted loose contents show general use wear. Functionality of individual items not tested — sold as-is.

Approximate Dimensions: TBA (flat box lot)

Refer to photos and in-person inspection for condition.

Camco RV self-clamping 15-foot sewer hose, super heavy duty construction. Features integrated clamps for easy installation with no separate clamps required. Includes full drain adapter fittings. Box also contains what appear to be yellow sewer hose donut/bayonet adapters. Designed for standard RV sewer connections.

Condition: Item appears unused and in original box. Box shows shelf wear and minor scuffing. Contents appear complete and undisturbed. Functionality not independently verified — sold as-is.

Approximate Dimensions: TBA

Refer to photos and in-person inspection for condition.

Mixed lot of kitchen appliances and cookware. Lot includes a GE black electric roaster oven with domed lid, a Hamilton Beach 2-slice toaster in stainless and black finish, a large aluminum stockpot with lid, a large non-stick skillet/braiser pan, and what appears to be a large aluminum steamer or stock pot with perforated insert basket. All items show use consistent with a working kitchen environment.

Condition: All items show use wear and require cleaning. Roaster oven exterior and interior show grease buildup and residue. Non-stick skillet shows heavy use with coating wear. Stockpot and insert show staining and residue. Toaster shows general use wear. Operational status of electric items not tested — sold as-is.

Approximate Dimensions: TBA

Refer to photos and in-person inspection for condition.

Pair of Kicker Comp series subwoofers in carpeted enclosures. Both units display Kicker "Comp" series branding. One enclosure is a standard rectangular box style; the second is a wedge/angled enclosure. Speaker size appears consistent with a 10-inch driver on both units based on visual reference. Both enclosures are wrapped in black carpet. Wiring terminals not visible in photos.

Condition: Both enclosures show use wear — carpet covering shows lint, debris, and general surface wear. Speaker cones and surrounds appear intact with no visible tears or damage. Operational status not tested — sold as-is. Refer to photos and in-person inspection for condition.

Large mixed lot of carbide tipped circular saw blades in assorted sizes and tooth counts. Brands identified include Omark, Credo, Craftsman, Hercules, and Sears. Blade sizes visible include 8-inch, 10-inch, and 7-1/4-inch. Tooth configurations include general purpose and combination styles. Mix of packaged/new old stock blades and loose used blades. One abrasive cutoff disc also included.

Condition: Lot contains a mix of new unused blades in original packaging and used blades showing varying degrees of wear. Some packaging shows age and shelf wear. Used blades show pitch/resin buildup consistent with use. Individual blade condition varies — inspect each blade at time of pickup. Refer to photos and in-person inspection for condition.

Mixed combination wrench set in molded plastic carry case. Brands identified include Craftsman (Forged in USA) and Pittsburgh. Both SAE and metric sizes represented. Wrenches are open-end/box-end combination style. Case is a two-tray hinged design with molded slots. Approximate count of 20+ wrenches visible across photos.

Condition: Wrenches show use wear with surface oxidation and light debris consistent with shop use. Case shows dirt and debris in tray slots. No visible broken or severely damaged wrenches noted. Set appears incomplete — some tray slots may be empty. Refer to photos and in-person inspection for condition.

Pittsburgh 3/4-inch drive socket wrench set, SKU S3994. 21-piece set includes 16 SAE sockets ranging from 7/8 to 2 inches, one reversible ratchet, one sliding T-bar, two extension bars (4-inch and 8-inch), housed in original red metal carry case. Made in China.

Condition: Set shows use wear throughout — sockets and tools display grease and debris consistent with shop use. All components appear present based on lid inventory label. Metal case shows surface wear and scratches. Refer to photos and in-person inspection for condition.

Auto body repair hammer and dolly set in molded plastic carry case. Set includes three body hammers with red fiberglass handles and rubber grip zones, three body dollies in assorted shapes for panel work, and one additional small dolly or heel dolly. Tools are consistent with professional-grade auto body dent repair and metal shaping use. One tray slot appears empty in photos.

Condition: All tools show heavy use wear — red finish worn through on hammer heads and dollies, handles show grip wear and paint loss. Surface rust and debris present on striking faces and dolly surfaces. Case shows wear and debris in tray slots. One slot appears vacant — possible missing piece. Refer to photos and in-person inspection for condition.

Mixed lot of shop and garage tools spread across a Kobalt tool chest lid. Lot includes two grease guns (one lever-action, one pistol-grip), one pneumatic air file/sander, one caulk gun, a set of locking pliers/Vise-Grips, a small socket/bit set in tray, an oil can/oiler, a wire brush wheel, and assorted additional hand tools and fittings. Contents represent a general shop cleanup lot suited for a mechanic or tradesperson.

Condition: All items show heavy shop use — grease, grime, and surface rust consistent with working shop environment. No individual items appear tested for function. Sold as-is. Refer to photos and in-person inspection for condition.

Yale 1/2-ton spur geared block and tackle chain hoist, made in the United States of America. Cast iron housing with embossed Yale logo and capacity rating. Includes load chain. Yale is a long-established American manufacturer of industrial lifting equipment with a reputation for durability in heavy industrial and rigging applications.

Condition: Unit shows heavy surface rust and oxidation on housing and chain consistent with long-term storage or outdoor exposure. Mechanical function not tested —  Refer to photos and in-person inspection for condition.

Two plastic tote bins containing grow light components and related wiring. Contents include multiple high-intensity discharge (HID) style bulbs, what appear to be electronic ballasts, yellow and red wiring harnesses, power cords, a coil of clear tubing or wire, and assorted additional electrical components. Contents consistent with an indoor horticultural lighting setup.

Condition: Contents show use wear and general storage condition. Bulbs appear intact with no visible cracks observed. Ballast and wiring condition not tested — functionality of individual components cannot be verified. Bins show general storage wear. Refer to photos and in-person inspection for condition.